NEW 2003 COBRA MOTOR

**sisky wolf** · 08-13-2005, 01:28 PM

THIS WILL NOT LAST LONG...I NEED THE MONEY

FOR SALE..NEW 2003 COBRA MOTOR COMPLETE WITH SUPERCHARGER,PUMPS, PULLEYS ,BELTS , WIRING HARNESS, ETC...HAS 180 MILES ON THE MOTOR...SPUN ONE BEARING ..CRANK ONLY NEED,S POLISHING ($25) QUOTE OF $800 TO $900 TO TO INSTALL NEW BEARINGS AND RINGS(RECOMMENDED DUE TO POSSIBLE METAL CONTIMINATION)AND ASSEMBLE MOTOR FOR INSTALLATION. EVERYTHING EXCEPT NEW COMPUTER (WHICH I UNDERSTAND YOU CAN PICK UP FOR ABOUT $300 TO $400.

NEW COBRA CRATE MOTOR RUNS $12,000.00 PLUS SHIPPING AND TAX.

ASKING $4,500.00 OR BEST OFFER..

LARRY CELL (209) 401-7839

CASH OR CASHIERS CHECK ONLY...NO TRADES

WAS GOING TO DROP THIS MOTOR IN MY 85 CAPRI...BUT DECIDED TO PUT THE EXTRA CASH IN MY 98 COBRA...NOW WITH OVER 800 HP.

**04redmach1** · 08-13-2005, 02:25 PM

$2500 . I can get brand new motor with tranny for $5000

**sisky wolf** · 08-13-2005, 06:01 PM

THIS IS WHAT I GET FOR DEALING WITH TALKERS WHO DO NOT KNOW THE FIRST THING ABOUT A MOTOR..

SHORT BLOCK ALONE WOULD COST YOU MORE THAN YOUR COMMENT..

THE EATON S/C ,INTAKE ,THROTTLE BODY AND HEADS ARE WORTH $4500.00

I SUGGEST YOU RESEARCH BEFORE YOU TALK OR COMMENT...

SHOULD HAVE KNOWN BETTER THAN TO POST ON THIS WEBSITE, BUT I GUESS YOU TAKE THE LOWS WITH THE HIGH.S.

**Joe Friday** · 08-13-2005, 06:05 PM

Umm.. It's not really new if it's fucked up. If it were in mint condition you might beable to pull this one off, but definatley not with a spun bearing. I think 3k would be reasonable for the price though, good luck with your sale

**04redmach1** · 08-13-2005, 07:58 PM

Buddy i have an account with Ford so you dont know who you are talking too. Now $2500 or not

**sisky wolf** · 08-13-2005, 08:09 PM

WHOO BIG SHOT! BUY 5 MOTORS AT THE PRICE YOU QUOTED ANDI WILL BUY EVERYONE AT A 30% PROFIT TO YOU..

**NoSlo5.0** · 08-13-2005, 08:26 PM

Originally Posted by sisky wolf

THIS IS WHAT I GET FOR DEALING WITH TALKERS WHO DO NOT KNOW THE FIRST THING ABOUT A MOTOR..

SHORT BLOCK ALONE WOULD COST YOU MORE THAN YOUR COMMENT..

THE EATON S/C ,INTAKE ,THROTTLE BODY AND HEADS ARE WORTH $4500.00

I SUGGEST YOU RESEARCH BEFORE YOU TALK OR COMMENT...

SHOULD HAVE KNOWN BETTER THAN TO POST ON THIS WEBSITE, BUT I GUESS YOU TAKE THE LOWS WITH THE HIGH.S.

Unfortunately, the motor is only worth what a buyer is willing to pay for it. You can get the top end off a Lightning/Harley Ford on Ebay for a buy-it-now of $1100. I'm still trying to talk my wife into that one. You're offering it up at a fair price as far as I can tell, but unless you know how much damage was done as a result of the spun bearing, it's kind of a crap shoot. If I had the freedom to spend 4500, I'd buy it anyway.

Don't listen to the Mach owners, they're a shifty sort...

**02BlueStang** · 08-13-2005, 09:10 PM

I need a Cobra motor with everything....but not with a spun bearing....sorry bro, its what im looking for but without being able to see the engine in person, I couldn't drop that kinda dough on an engine that has a spun bearing in it.....

**04redmach1** · 08-13-2005, 11:49 PM

Originally Posted by NoSlo5.0

Don't listen to the Mach owners, they're a shifty sort...

And Cobra owners deserve

Just stating that the engine might be worth that in your eyes, but with a spun bearing there is ALOT more that could be wrong. You are wnating someone to give you $4500 for an engine they cant see,touch, or talk too. Thats like doing a mail order on a bride. I can tell you shes hot but when she gets to ya she could be 350 LB. And if you want some of the enigines and tranny's you can put an order in with me and as soon as new shipment comes in its alllllll yours. And no not a big shot, I KNOW WHAT THEY ARE WORTH

**NoSlo5.0** · 08-14-2005, 09:34 AM

Originally Posted by 04redmach1

And Cobra owners deserve

Now that's funny, I don't care who you are...

**sisky wolf** · 08-14-2005, 03:03 PM

I OWE MOST OF YOU AN APOLOGY! I POSTED ON THIS WEB SITE THINKING THE MEMBERS WERE MOSTLY LOCAL(NO. CALIF.) I CAN UNDERSTAND WHY NO ONE WOULD WANT TO BUY SIGHT UNSEEN..I WAS EXPECTING INTERESTED BUYERS TO DROP BY AND LOOK AT THE MOTOR FOR THEMSELVES...3 PISTONS HAVE BEEN PULLED(ONE ONE EACH SIDE OF THE SPUN BEARING) AND ONLY ONE BEARING WAS INVOLVED. MOTOR IS BROKEN DOWN FOR INSPECTION...MY MACHINIST (MECH. WHO PORTS AND WORKS MY HEADS, ALSO MY MOTORS HAS LOOKED AT THE MOTOR AND REASSURES ME THE CRANK ONLY NEEDS A POLISHING) OF COURSE RECOMMEND A COMPLETE FLUSH AND BEARING AND RINGS. DUE TO METAL CONTIMINATION...THE MOTOR IS IN BEAUTIFUL SHAPE...HE HAS ALSO QUOTED ME $800 TO $900 TO REBUILD MOTOR COMPLETELY PACKAGED WITH S/C ,AND ALL ACCESSORIES I WILL POST ON OTHER WEB SITES WHERE BUYERS CAN CHECK OUT THE MOTOR FOR THEMSELVES.
FORD DOES WANT $12,000.00 FOR A COMPLETE 2003 OR 2004 COBRA MOTOR PLUS SHIPPING AND TAX.

GOOD LUCK FINDING SOMETHING CHEAPER

**04redmach1** · 08-14-2005, 05:59 PM

Originally Posted by NoSlo5.0

Now that's funny, I don't care who you are...

ight cable guy hehe

And yes you are right they are $12,000 from ford

**sisky wolf** · 08-23-2005, 12:08 PM

TO ALL REPLIES AND VIEWS...FIRST BUYER TO STOP BY BOUGHT THE MOTOR AND LEFT REAL EXCITED..HE OWNS A CC MACHINE SHOP IN UNION CITY...WILL BE INSTALLING THE MOTOR IN A 39 FORD SEDAN.

LARRY

**grabberblueboss** · 08-24-2005, 04:14 PM

well you can get a 03 cobra from ford for around 4000 ...just call your local ford dealer and ask for part # 2r32-6006-aarm ..it has no blower but you can get a stock blower off ebay for around 500-600$$ we here at alabama mustang sell those from time to time on ebay for 7500$ and it is a long block

Thread: NEW 2003 COBRA MOTOR

Thread Tools

Display

NEW 2003 COBRA MOTOR

2003 COBRA MOTOR

2003 COBRA MOTOR

2004 COBRA MOTOR MOTOR DATE 04/27/04

Thread Information

Users Browsing this Thread

Posting Permissions