speakers??? 6x8 and 5x7

[Hmongstang]

i blew my front speakers, anyone know a good speaker that would like to recommend me getting???

[J]

Fronts? Get MBQUARTZ.. w/components.. they own all.

[_eazy_]

Fronts? Get MBQUARTZ.. w/components.. they own all.

MB Quartz > All.

i'd get em off eBay however.... versus dishing out $300-$400 for a pair.

[Hmongstang]

i'm broke now and just looking for something better than the factory ones to replace them


here are some i found: let me know which one is better. thanks


Product Description:
Blitz Audio 5x7/6x8" 3-Way Speakers 300 Watts Max

Details:
·One Pair 5 x 7 /6 x 8 Three-Way Triaxial ·Speaker System ·LED Light In Operation ·Power Handling: 150 Watts RMS/300 Watts ·Max ·Non-Fatiguing Butyl Rubber Surround ·1" High Temperature Aluminum Voice Coil ·Poly Injection Cone ·30 oz. Magnet Structure ·Rubber Magnet Boot ·1" Neodymium Film Dome Midrange ·3/4"Piezo Tweeter ·Impedance: 4 Ohm ·Sensitivity: 90 dB ·Frequency Response: 70Hz-20KHz ·Includes Wires and Mounting Hardware ·Mounting Depth: 2.5"

$26.99


Product Description:
AudioPipe 5x7" 2-Way 400 Watts Max

Details:
5" X 7" Dynamic 2-Way Car Speaker, Power 400 Watts, Rated Power: 200 Watts Blue Electroplated IMPP Composite Cone, Blue Electroplated PPTA Dome Tweeter, Chrome Plated Tweeter Cover, 10 Oz Strontium Magnet, Frequency Response: 50-20000 Hz, Sensitiv

$26.99


Product Description:
Pioneer 6x8" 3-Way Speakers 220 Watts Max

Details:
·Aramid Fiber Injected IMPP Cone ·Long Voice Coil ·Glass-Imide Voice Coil Bobbin ·1 5/8" Balanced Dome PPC Midrange ·Butyl Rubber Surround ·3/8" Dome Supertweeters ·

$49.99

leaning toward the Pioneer

[_eazy_]

i'm broke now and just looking for something better than the factory ones to replace them


here are some i found: let me know which one is better. thanks


Product Description:
Blitz Audio 5x7/6x8" 3-Way Speakers 300 Watts Max

Details:
·One Pair 5 x 7 /6 x 8 Three-Way Triaxial ·Speaker System ·LED Light In Operation ·Power Handling: 150 Watts RMS/300 Watts ·Max ·Non-Fatiguing Butyl Rubber Surround ·1" High Temperature Aluminum Voice Coil ·Poly Injection Cone ·30 oz. Magnet Structure ·Rubber Magnet Boot ·1" Neodymium Film Dome Midrange ·3/4"Piezo Tweeter ·Impedance: 4 Ohm ·Sensitivity: 90 dB ·Frequency Response: 70Hz-20KHz ·Includes Wires and Mounting Hardware ·Mounting Depth: 2.5"

$26.99


Product Description:
AudioPipe 5x7" 2-Way 400 Watts Max

Details:
5" X 7" Dynamic 2-Way Car Speaker, Power 400 Watts, Rated Power: 200 Watts Blue Electroplated IMPP Composite Cone, Blue Electroplated PPTA Dome Tweeter, Chrome Plated Tweeter Cover, 10 Oz Strontium Magnet, Frequency Response: 50-20000 Hz, Sensitiv

$26.99


Product Description:
Pioneer 6x8" 3-Way Speakers 220 Watts Max

Details:
·Aramid Fiber Injected IMPP Cone ·Long Voice Coil ·Glass-Imide Voice Coil Bobbin ·1 5/8" Balanced Dome PPC Midrange ·Butyl Rubber Surround ·3/8" Dome Supertweeters ·

$49.99

leaning toward the Pioneer

find the sensitivity on the last 2. every +6db in sensitivity means 2X as loud @ the same watts.

i'd go with the one's that are most sensitive with the most power (obviously)

[CODY2003]

I don't want to steal your thread, but starns, what do you think about the sony component system? I ask because I'm using my red sony subs in the new system and kinda want the components to match. Either that or do you have some better good looking speakers and grilles preferably red and silvers.
This is the set I'm talking about.

[_eazy_]

I don't want to steal your thread, but starns, what do you think about the sony component system? I ask because I'm using my red sony subs in the new system and kinda want the components to match. Either that or do you have some better good looking speakers and grilles preferably red and silvers.
This is the set I'm talking about.

lmao, all you care about is the "look" of sound. Well, IMO, i've heard the sony components in a acura RSX and they sounded alrught for xplods. Joseph has xplod components in his GTR. for the money, they're a great choice. As for appearence, they match your subs, and you can get or paint the grilles in whichever color you choose

[CODY2003]

lmao, all you care about is the "look" of sound. Well, IMO, i've heard the sony components in a acura RSX and they sounded alrught for xplods. Joseph has xplod components in his GTR. for the money, they're a great choice. As for appearence, they match your subs, and you can get or paint the grilles in whichever color you choose

Ok what would be better that has a rather simple yet sharp look and is better in your opinion and in silver. I would rather not use the sonys but you have to remember that I show my car and the look is far more important than the sound at a show. being that you normally can't fire up anything. If I had my choice I would have kenwood for all of my components, but they arn't so hot looking. you know? This is a long time down the road because I will be making fiberglass parts to house everything. I can't afford a lot either. I can't even get rims as you can tell.
(side note) I may be half way there if some PS contracts come through for me

[_eazy_]

Ok what would be better that has a rather simple yet sharp look and is better in your opinion and in silver. I would rather not use the sonys but you have to remember that I show my car and the look is far more important than the sound at a show. being that you normally can't fire up anything. If I had my choice I would have kenwood for all of my components, but they arn't so hot looking. you know? This is a long time down the road because I will be making fiberglass parts to house everything. I can't afford a lot either. I can't even get rims as you can tell.
(side note) I may be half way there if some PS contracts come through for me

http://www.cadencesound.com/action.l...ue=155&-search

[CODY2003]

http://www.cadencesound.com/action.l...ue=155&-search

Nice! what guard would I use with it though?

[_eazy_]

Nice! what guard would I use with it though?

what color interior you workin with?

[CODY2003]

what color interior you workin with?

Black, charcoal, and silver. Accent is red

[_eazy_]

Black, charcoal, and silver. Accent is red

just take off your old speaker covers, and paint them red (if your console and door jams are red)

[CODY2003]

just take off your old speaker covers, and paint them red (if your console and door jams are red)

I'm gonna make complete fiberglass enclosures for them all(not enclosures but you know). both on the doors and on the rear panels that I'm making for my subs. remember, show before go.

[_eazy_]

I'm gonna make complete fiberglass enclosures for them all(not enclosures but you know). both on the doors and on the rear panels that I'm making for my subs. remember, show before go.

those speakers are red/orange. it MIGHT look badass with red "enclosures" but it also might turn out unlike you want. i'd chop some a lil to get a good idea.

take a pic or your door, chop a "enclosure", and add a cadence

[CODY2003]

those speakers are red/orange. it MIGHT look badass with red "enclosures" but it also might turn out unlike you want. i'd chop some a lil to get a good idea.

take a pic or your door, chop a "enclosure", and add a cadence

I did a while back.
Here is a very crude version of what it will be. On both sides with interior match vinyl for a cleaner look.
http://www.3.8mustang.com/forum/atta...chmentid=32440

[CODY2003]

This is what I would do for the door. either black like that or the same color match.

[_eazy_]

This is what I would do for the door. either black like that or the same color match.

get those cadences... PM 04redmach1 and he'll tell you all about em

i think they'd look great (plus sound quality is right behind MB Quart)

[CODY2003]

get those cadences... PM 04redmach1 and he'll tell you all about em

i think they'd look great (plus sound quality is right behind MB Quart)

Still what guard would look good on them? I can't leave them open unless I want to replace them all the time lol.

[Hockeyb0y3]

i love my Dragster componet speakers and tweeters.

[04redmach1]

The Cadence come with a guard for the speakers.. And are you looking for just speakers or a whole set up? They have subs that match the ones in that pic and they arent too xpensive.

[CODY2003]

Ya, but they are just some black grille. I want something with a little style and bling.

[04redmach1]

Well see if you can find someone to make you some---or what brand do you like cause i get every brand....

[CODY2003]

Well see if you can find someone to make you some---or what brand do you like cause i get every brand....

I could machine my own if I wanted to. Like I did with my shifter. What do you have that is kinda angularly shaped in a 5.25 speaker size? And so you have anything in that same look for my tens?

[04redmach1]

http://www.cerwinvega.com/products/m...dio/index.html

There is cerwin vega