gotstang.com forums logo
back to gotstang.com
Page 1 of 2 12 LastLast
Results 1 to 25 of 28
  1. #1
    michaeliscool is offline
    Gotstang? Newbie!
    Join Date
    Nov 2004
    Location
    fort worth TX united states
    Posts
    10

    Exclamation What Air intake would you suggest for my 2003 mach 1

    I'm planning on buying some sort of cold air intake soon but i'm not really sure what a good option is for the mach 1's. I would appreciate your opinions.

  2. #2
    Joe Friday is offline
    V8 ***** Master Joe Friday's Avatar
    Join Date
    Nov 2004
    Location
    Louisville Kentucky United States of America
    Posts
    942

    Default

    There isn't really one since the hood scoop already acts as a cold air intake. Save up your money for gears(no less than 4.10's), drop springs, or long tube headders. you won't be dissapointed at all with any of those mods, esp gears it will feel like you added a super charger. If you plan on going forced induction go with 3.73's if you have any questions don't be afraid to shoot me a pm
    Imports: When Old School means 1991

    -Adrian
    -2000 Black GT

  3. #3
    mysteed is offline
    V6 Guru
    Join Date
    Nov 2004
    Location
    Canton GA United States of America
    Posts
    512

    Default

    Quote Originally Posted by Joe Friday
    There isn't really one since the hood scoop already acts as a cold air intake. Save up your money for gears(no less than 4.10's), drop springs, or long tube headders. you won't be dissapointed at all with any of those mods, esp gears it will feel like you added a super charger. If you plan on going forced induction go with 3.73's if you have any questions don't be afraid to shoot me a pm
    1994 v6- Project car
    1997 v6- M112'd, SSM 2+ powerpack- In process of being a track car
    1998 GT- Daily Driver
    2001 GT- Vortech supercharged plus a few bolton's
    Sponsors for the 97 V6:
    VMP Tuning
    Super Six Motorsports
    Autobadges.com

  4. #4
    04redmach1 is offline
    autosoundandperformance
    Join Date
    Nov 2004
    Location
    Columbus GA USA
    Posts
    399

    Default

    The most your gonna get out of cold air is 15rwhp and thats on the K&N dyno proved from my shop. Now this winter in my mach im doing gears,302 stroker kit,cams,port and polish heads, and NOS. Just let me know what your looking for and ill see what I can do for ya.

  5. #5
    Aerosi665 is offline
    2002 4.6L V8 Aerosi665's Avatar
    Join Date
    Dec 2004
    Location
    Tempe Arizona United States
    Posts
    222

    Default

    15rwhp out of an intake?! Holy crap. I wish I could get that out of mine. I'd be lucky with ~8.
    Black 2002 GT 5-spd

    Performance: 2.5" Magnapacks / MGW Shifter (Blue Handle) / H&R Super Sport Lowering Springs / 4.10 Motive Performance Gears / MAC Offroad H-Pipe
    Appearance: Mach 1 Chin / Mach 1 Grill / 17x8 Chrome Bullits / SS Inserts / Tint

  6. #6
    thumpin347 is offline
    Gotstang? Regular thumpin347's Avatar
    Join Date
    Nov 2004
    Location
    NYC NY USA
    Posts
    373

    Default

    Quote Originally Posted by 04redmach1
    The most your gonna get out of cold air is 15rwhp and thats on the K&N dyno proved from my shop. Now this winter in my mach im doing gears,302 stroker kit,cams,port and polish heads, and NOS. Just let me know what your looking for and ill see what I can do for ya.
    you are an idiot. 15whp on an N/A car? since its your shop...post up a stock airbox compared to the K&N kit...and i mean dyno graphs with pics of the runs. i guarantee you that you are full of shit, with 100 bux paypal'd to you if you're right. oh, and who says NOS??? you must be 17...

    mike:

    4.30 gears
    MGW short throw shifter
    offroad x pipe
    catback
    timing adjuster

    there really isnt much to do with mod motors. other than throwing on long tubes and going drag suspension set up if you are into dragging at the strip. other than that, you are left to resort to a boosted application, nitrous, or going stroker motor.

    the 4.30s will give you the best bang for the buck and allow that 4 valve to rev up nicely. the exhaust will just get you sounding good and the shifter will help you bang some gears. that'll get you started for a good base on a nice lil street stang.

    you can shoot me a PM as well with any questions.

  7. #7
    04redmach1 is offline
    autosoundandperformance
    Join Date
    Nov 2004
    Location
    Columbus GA USA
    Posts
    399

    Default

    I said NOS for short butt munch. And I dont have to prove a damn thing to you. And there were bout 45-50 mach 1 went to atlanta last year when the K&N just came out and everyone did a run without and with the cold air kit. Automatics were pumping 10-12 and stick was at 12-15 rwhp. Dont speak unless you KNOW what your talking bout.

  8. #8
    02BlackGT is offline
    Gotstang? Newbie!
    Join Date
    Nov 2004
    Location
    Jeffersonville IN
    Posts
    52

    Default

    Quote Originally Posted by thumpin347
    you are an idiot. 15whp on an N/A car? since its your shop...post up a stock airbox compared to the K&N kit...and i mean dyno graphs with pics of the runs. i guarantee you that you are full of shit, with 100 bux paypal'd to you if you're right. oh, and who says NOS??? you must be 17...

    mike:

    4.30 gears
    MGW short throw shifter
    offroad x pipe
    catback
    timing adjuster

    there really isnt much to do with mod motors. other than throwing on long tubes and going drag suspension set up if you are into dragging at the strip. other than that, you are left to resort to a boosted application, nitrous, or going stroker motor.

    the 4.30s will give you the best bang for the buck and allow that 4 valve to rev up nicely. the exhaust will just get you sounding good and the shifter will help you bang some gears. that'll get you started for a good base on a nice lil street stang.

    you can shoot me a PM as well with any questions.
    I like this guy...straight to the point and calls you out with CORRECT information.

  9. #9
    thumpin347 is offline
    Gotstang? Regular thumpin347's Avatar
    Join Date
    Nov 2004
    Location
    NYC NY USA
    Posts
    373

    Default

    Quote Originally Posted by 04redmach1
    I said NOS for short butt munch. And I dont have to prove a damn thing to you. And there were bout 45-50 mach 1 went to atlanta last year when the K&N just came out and everyone did a run without and with the cold air kit. Automatics were pumping 10-12 and stick was at 12-15 rwhp. Dont speak unless you KNOW what your talking bout.
    trust me i know what i'm talking about. my father put a JLT intake on his marauder, which is a Mach motor, put it on a dyno, and saw gains of only 3 HP peak, and 6 TQ. dude, its an easy 100 bux for you if you can prove me wrong...and if you are wrong i get nothing in return...nothing but a friendly bet. why dont you take that bet? you own a shop, it'll take you no longer than 30 minutes for a dyno pull with and without a CAI? i am so confident in how full of shit you are, i'd bet on it and risk being made a fool of.

    this is the last of my personal attacks...i just dont take too kindly to
    "INTERNET RACERS" who provide the wrong information to somebody that wants to know nothing but the truth
    Last edited by thumpin347; 12-17-2004 at 03:52 PM.

  10. #10
    04redmach1 is offline
    autosoundandperformance
    Join Date
    Nov 2004
    Location
    Columbus GA USA
    Posts
    399

    Default

    LOL see you dont know what your talking about. WAY different engine than mach. Where do I start, hmmm... cams are differ, mach has high flow heads, more compression in mach. apples and oranges. thats what your compairing. YOU HAVE NO IDEA WHAT YOUR TALKING ABOUT. Listen to me----I own a business ok you still with me? My bread and butter comes out of what I know and what I can do. So when I tell a customer what he CAN expect, then gets it. you still with me right? Ok well I obviously know what im talking about since im still open and I have repeat customers. I dont have any dyno sheets with me right now and I dont have to take your money or be an a$$,,,which im not trying to be. But dont tell me what I know when you have NO CLUE what your talking about. Go get a mach and put one on and see what you get. Or bring your happy go lucky a$$ down to mine and I will show you. But right now im busy with A REPEAT CUSTOMER and putting an exhaust on MR. maruader man. And if your older than me well you didnt get wiser so keep growing. Oh and one of the mach's which is a buddy of mine got 11 rwhp with 14 torque.

  11. #11
    232stang is offline
    11.28 posts per day 232stang's Avatar
    Join Date
    Nov 2004
    Location
    Los Angeles California U.S.A.
    Posts
    575

    Default

    i really doubt you can get so much power with just a cai, because thats what cobras are gaining and they have the roots blower. but if you do get that increase good for u

  12. #12
    thumpin347 is offline
    Gotstang? Regular thumpin347's Avatar
    Join Date
    Nov 2004
    Location
    NYC NY USA
    Posts
    373

    Default

    once again, you are not correct. from intake to oil pan, both motors are the SAME. the only difference is the intake is faced toward the driver's side to suit the driver side air box set up of the panther platform. the ONLY difference between a Marauder and a 5spd Mach is that a marauder uses a cast steel crank, whereas the 5spd Machs use a forged crank. HOWEVER, the auto machs use cast cranks as does the marauder. the Heads, rods and pistons are shared by both power plants. some mach people say the cam lobes are a little bit more aggressive than the marauder...but this is not an actual truth, since people can claim all they want but cannot come up with the lift numbers on the two cams. the main difference in the motor is the engine calibration codes.

    now...if you flip through your ford racing catalog. you will notice they offer a marauder motor, and a mach motor. HOWEVER, they share the SAME EXACT PART NUMBER, with the exception of an "A" in place of a "1", denoting the fact that the motor with part number "A" utilizes a cast crank for Auto marauders and Machs.

    i could care less if you own a shop. a monkey can open up a shop. any shop can remain open to those that rely on shop guys like you to point them in the right direction. obviously you are doing a great job claiming 15whp on hyped up parts like CAI's to people oblivious to reality, thus resulting in sales. BUT, that is dishonest business practice and you lack business ethics. i've only seen 2 posts i agree with, one being the predator does no good with only 2hp max gains, and SCT chips being better than Diablo. that is the only area i agree with you.

    anyone else who knows any better will NOT GO TO A SHOP, unless for a dyno tune. i havent stepped foot in a shop in over 2 years. i do all my own work, and research my own parts and have my parts connections all over the country.

    keep trying to prove me wrong and i'll keep knocking you off the pedestal you keep trying to climb and stand up on above me, because the truth is, i'll make you look incredibly ridiculous, and nobody on this site will want to do business with your crooked business. i know what you are trying to do, and you are trying to solicit business off of members here with your BS group buys where you save 30 bux. and honestly, i will not stand for it, unless you are paying J an advertiser's fee to promote your shit business on his site.

    THE END

  13. #13
    04redmach1 is offline
    autosoundandperformance
    Join Date
    Nov 2004
    Location
    Columbus GA USA
    Posts
    399

    Default

    Well I dont give a shit what you think and you can go to hell. Its people like you that just aint got a damn clue. I have excellent business practice and know what im talking about.. And you do your own work LOL they way you talk your shit shouldnt even crank up. A mustang deserves a better owner. Im tierd of playing with your lil ass if you got something to say call me 1-888-993-7613 . And ya I sell a couple things on here but alot cheaper than you will get them anywhere else and ive already talk to a mod bout postin products so mind your own F****** business. Thats all im saying to your stupid ass. THE END Oh and the mach and cobra have same part # also on book but that doesnt mean a damn thing shade tree boy

  14. #14
    thumpin347 is offline
    Gotstang? Regular thumpin347's Avatar
    Join Date
    Nov 2004
    Location
    NYC NY USA
    Posts
    373

    Default

    Quote Originally Posted by 04redmach1
    Well I dont give a shit what you think and you can go to hell. Its people like you that just aint got a damn clue. I have excellent business practice and know what im talking about.. And you do your own work LOL they way you talk your shit shouldnt even crank up. A mustang deserves a better owner. Im tierd of playing with your lil ass if you got something to say call me 1-888-993-7613 . And ya I sell a couple things on here but alot cheaper than you will get them anywhere else and ive already talk to a mod bout postin products so mind your own F****** business. Thats all im saying to your stupid ass. THE END Oh and the mach and cobra have same part # also on book but that doesnt mean a damn thing shade tree boy
    BWAHAHAHA, okay...great comeback buddy

  15. #15
    thumpin347 is offline
    Gotstang? Regular thumpin347's Avatar
    Join Date
    Nov 2004
    Location
    NYC NY USA
    Posts
    373

    Default

    Quote Originally Posted by 04redmach1
    Oh and the mach and cobra have same part # also on book but that doesnt mean a damn thing

  16. #16
    thumpin347 is offline
    Gotstang? Regular thumpin347's Avatar
    Join Date
    Nov 2004
    Location
    NYC NY USA
    Posts
    373

    Default

    Marauder Crate motor part #: M-6007-MA46
    Mach 1 Crate motor: M-6007-M146
    1999 N/A Cobra Crate motor: M-6001-C469
    2001 N/A Cobra Crate motor: M-6001-C460

    i fail to see how a Mach's part number is the same as the Cobra part number

  17. #17
    Joe Friday is offline
    V8 ***** Master Joe Friday's Avatar
    Join Date
    Nov 2004
    Location
    Louisville Kentucky United States of America
    Posts
    942

    Default

    perhapse... and I'm going out on a limb here...... They are not the exact same blocks....**gasp**
    Imports: When Old School means 1991

    -Adrian
    -2000 Black GT

  18. #18
    thumpin347 is offline
    Gotstang? Regular thumpin347's Avatar
    Join Date
    Nov 2004
    Location
    NYC NY USA
    Posts
    373

    Default

    Quote Originally Posted by Joe Friday
    perhapse... and I'm going out on a limb here...... They are not the exact same blocks....**gasp**
    i was just pointing out how the mach and cobra do not share the same part number as 04mach claimed, thats all

  19. #19
    Joe Friday is offline
    V8 ***** Master Joe Friday's Avatar
    Join Date
    Nov 2004
    Location
    Louisville Kentucky United States of America
    Posts
    942

    Default

    yeah I know.. I was futhering the p'owning on this guy
    Imports: When Old School means 1991

    -Adrian
    -2000 Black GT

  20. #20
    04redmach1 is offline
    autosoundandperformance
    Join Date
    Nov 2004
    Location
    Columbus GA USA
    Posts
    399

    Default

    Look at a fords service dept book lame ass

  21. #21
    04redmach1 is offline
    autosoundandperformance
    Join Date
    Nov 2004
    Location
    Columbus GA USA
    Posts
    399

    Default

    Oh and no shit they dont have the same block arent you a fuckin smart one.
    Yall are so so dense. You ned to look b4 you speak. and when your poor ass saves up enough to get a mach maybe you will know what a K&N does.

  22. #22
    thumpin347 is offline
    Gotstang? Regular thumpin347's Avatar
    Join Date
    Nov 2004
    Location
    NYC NY USA
    Posts
    373

    Default

    Quote Originally Posted by 04redmach1
    Oh and no shit they dont have the same block arent you a fuckin smart one.
    Yall are so so dense. You ned to look b4 you speak. and when your poor ass saves up enough to get a mach maybe you will know what a K&N does.
    hahahahahaha...because Machs are such high end vehicles. give me a break. what a K&N does to an NA car is universal regardless of whether its a Mach, or just a 2v GT...get that through your head.

    way to come off as a mature business owner. seriously, the only purpose you serve is for a good laugh.

  23. #23
    mysteed is offline
    V6 Guru
    Join Date
    Nov 2004
    Location
    Canton GA United States of America
    Posts
    512

    Default

    04redmach1, what's your business' name and address? Just wondering, b/c I live kinda near you.
    1994 v6- Project car
    1997 v6- M112'd, SSM 2+ powerpack- In process of being a track car
    1998 GT- Daily Driver
    2001 GT- Vortech supercharged plus a few bolton's
    Sponsors for the 97 V6:
    VMP Tuning
    Super Six Motorsports
    Autobadges.com

  24. #24
    04redmach1 is offline
    autosoundandperformance
    Join Date
    Nov 2004
    Location
    Columbus GA USA
    Posts
    399

    Default

    Ya i use to go up there when i raced RC cars couple years ago.. Im off of veterens parkway. Penny Pushers Automotive

  25. #25
    BruntzySVT is offline
    I OWN STARNS BruntzySVT's Avatar
    Join Date
    Nov 2004
    Location
    fort worth TX United States
    Posts
    1,239

    Default

    MICHEAL UR SHIT I SLOW!

    466RWHP 490RWTQ
    Magnaflow Cat-Back, UPR O/R X-pipe, K&N FIPK
    2.76 Non Slip S/C Pulley
    4 Peice Idler Set 3 100mm 1 92mm
    Gates 74.5" Belt
    NGK TR6 Plugs
    SCT Multi Chip Package Custom Tuned By Herman


    GSMC#1

    I am a and I am definately a

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •