PDA

View Full Version : need help!



88lx50
12-27-2006, 09:16 PM
I was on the way home yesterday and was about to turn in when the car died. I thought it was the fuel pump because I didn't hear it prime up. I looked at the inertia switch and that wasn't it. I replace the fuel pump today and nothting. I put the car in the on position I get a click and that's it. I was thinking no that I should look at the fuel pump relay or a link. I did see one that looks a little questionable. Does anyone know where the fuel pump relay is located? Any other idea's would be helpful too.

yosemiddysam
12-28-2006, 09:56 AM
There should be one right under the drivers seat. It might be under the crapet though. I should not be but check there.

88lx50
12-28-2006, 01:41 PM
your right. I went to ford and bought the interia switch and the fuel pump relay and only used the relay. It was the relay that was fried. Thanks for the help.

yosemiddysam
12-28-2006, 03:29 PM
Any time man. I love helpin people so they wont have to spend tons of money that could go to mods on over chargin mechanics.

crimsonblack
12-28-2006, 05:09 PM
Would that cause the car to die going from drive into reverse? Sometimes when I back out of somewhere slide the car into drive it will die. Starts right back up though and only does it once in a while right now. suggestions?

boss91gt
12-28-2006, 05:32 PM
Try running a diagnostic test on the computer.

yosemiddysam
12-28-2006, 06:22 PM
I have heard that a jacked up nuetral safety switch can cause that. If it does it and wont start I would try that.