MCHNROL
05-12-2006, 04:46 PM
I owe $20500. My selling values are determined from what I have seen other Mach's valued for and are impartial as can be. I'm not giving anything away but feel the following prices are generous. This car is fast enough that when I raced Jeff in his Cobra (he had just got his '04 and was stock, I was modded (except I still had 3.55 gears and no dyno tune) From 0-60 we were dead even, 80-100mph he edged me by a car and above 100 his boost pulled me. It was better than he even imagined as he told me. The following contains as much detail as possible. If there are any questions, PM me.
$20500 as it sits.
2003 Mustang Mach 1, 1 of 1611 '03 Black Mach 1's IUP
SCT: Excalibrator w/computer cable, 2 custom tunes included for this setup with either 3.55 or 4.10 gears. One additional spot open for additional tune.
Steeda: Tri-ax, Two point strut tower brace
MRT: PRO-M 80mm MAF (replaces stock 80mm that has a 7/16 inch finger 2.5 in. down the center), Street Smart CAI (chrome 4in. power pipe with black plastic airbox with carbon fiber lid), Full 2 1/2in. MagnaFlow catted H-pipe, catback w/Mach tips (Bought new over $960 to last life of car, made of T-3004 stainless steel), Raised Shaker, FRPP 4.10 rear w/31-spline Mosers with welded axle tubes, Trac-loc , T/A Girdle, CDC Mach 1 four piece floormats, Gripper Mach 1 trunkmat, Silver Stripes, Bullitt fuel door, Spincaps, Build date ID plates, Tinted windows @ 35%, Signed by Scott Hoag (project mgr. of Bullitt/Mach1 “Living Legends” project at Ford) 4/17/04 @ 40th anniv. bash in Nashville and 40 years to the date of Mustang. Only about 50 Machs signed on this date. Modular Depot SCT Tuned X-calibrator >Dynojet: SAE 297.2 rwhp@5000rpm & 325.2rwtq@4200rpm
Mileage 27,161 65% of those miles are highway driving back and forth to Louisville from Dayton, OH Never driven in salt(no winters), full synthetic oil, Sold as is with over $2800 in mods. Sale includes dyno sheet and track slip.
$20500 firm
Depending on mods removed, this is an automobile quite capable of a full warranty until 10/09/06.
This N/A car as it sits has run a 12.79 @ 108 (05/05) on Nitto 275/40R17 and a 12.94 @ 107 (11/05)on factory street tires that still have a good 15,000 left.
$19500 stock but includes: Steeda: Two point strut tower brace
Raised Shaker, 4.10 rear w/31-spline Mosers with welded axle tubes, T/A Girdle, Bullitt fuel door, CDC Mach 1 four piece floormats, Gripper Mach 1 trunkmat, Build date ID plates, Tinted windows @ 35%, Signed by Scott Hoag 4/17/04 @ 40th anniv. bash in Nashville and 40 years to the date of Mustang. Only about 50 Machs signed on this date. Depending on mods removed, this is an automobile quite capable of a full warranty until 10/09/06.
$19000 stock but includes: Steeda: Two point strut tower brace, Raised Shaker, Stock rear end w/welded axle tubes, Silver Stripes, Build date ID plates, Tinted windows @ 35%, Signed by Scott Hoag 4/17/04 @ 40th anniv. bash in Nashville and 40 years to the date of Mustang. Only about 50 Machs signed on this date. This is an automobile has full warranty until 10/09/06.
The full OASIS report can be viewed on the mach1registry.com on approx. page 25 under MCHNROL.
Inquire about any Mach 1 memorabilia or full color framed prints about this car.
$20500 as it sits.
2003 Mustang Mach 1, 1 of 1611 '03 Black Mach 1's IUP
SCT: Excalibrator w/computer cable, 2 custom tunes included for this setup with either 3.55 or 4.10 gears. One additional spot open for additional tune.
Steeda: Tri-ax, Two point strut tower brace
MRT: PRO-M 80mm MAF (replaces stock 80mm that has a 7/16 inch finger 2.5 in. down the center), Street Smart CAI (chrome 4in. power pipe with black plastic airbox with carbon fiber lid), Full 2 1/2in. MagnaFlow catted H-pipe, catback w/Mach tips (Bought new over $960 to last life of car, made of T-3004 stainless steel), Raised Shaker, FRPP 4.10 rear w/31-spline Mosers with welded axle tubes, Trac-loc , T/A Girdle, CDC Mach 1 four piece floormats, Gripper Mach 1 trunkmat, Silver Stripes, Bullitt fuel door, Spincaps, Build date ID plates, Tinted windows @ 35%, Signed by Scott Hoag (project mgr. of Bullitt/Mach1 “Living Legends” project at Ford) 4/17/04 @ 40th anniv. bash in Nashville and 40 years to the date of Mustang. Only about 50 Machs signed on this date. Modular Depot SCT Tuned X-calibrator >Dynojet: SAE 297.2 rwhp@5000rpm & 325.2rwtq@4200rpm
Mileage 27,161 65% of those miles are highway driving back and forth to Louisville from Dayton, OH Never driven in salt(no winters), full synthetic oil, Sold as is with over $2800 in mods. Sale includes dyno sheet and track slip.
$20500 firm
Depending on mods removed, this is an automobile quite capable of a full warranty until 10/09/06.
This N/A car as it sits has run a 12.79 @ 108 (05/05) on Nitto 275/40R17 and a 12.94 @ 107 (11/05)on factory street tires that still have a good 15,000 left.
$19500 stock but includes: Steeda: Two point strut tower brace
Raised Shaker, 4.10 rear w/31-spline Mosers with welded axle tubes, T/A Girdle, Bullitt fuel door, CDC Mach 1 four piece floormats, Gripper Mach 1 trunkmat, Build date ID plates, Tinted windows @ 35%, Signed by Scott Hoag 4/17/04 @ 40th anniv. bash in Nashville and 40 years to the date of Mustang. Only about 50 Machs signed on this date. Depending on mods removed, this is an automobile quite capable of a full warranty until 10/09/06.
$19000 stock but includes: Steeda: Two point strut tower brace, Raised Shaker, Stock rear end w/welded axle tubes, Silver Stripes, Build date ID plates, Tinted windows @ 35%, Signed by Scott Hoag 4/17/04 @ 40th anniv. bash in Nashville and 40 years to the date of Mustang. Only about 50 Machs signed on this date. This is an automobile has full warranty until 10/09/06.
The full OASIS report can be viewed on the mach1registry.com on approx. page 25 under MCHNROL.
Inquire about any Mach 1 memorabilia or full color framed prints about this car.