driftsx
05-09-2006, 04:19 PM
car is red , has 5 star 17" oz racing rims.has working AC. has power windows,locks,mirrors,steering,brakes. has black leather seats.
car is lowered with sport line springs, kyb shocks.
for the motor it has 30k miles. its a built 306 by rj kauffman engine services. have reciepts and all.
366hp, 403 tq
specs on motor:
all new accesaries
new plugs,
motorsports spark plug wires
diablo sport tuned computer
bbk 65mm port matched throttle body
bbk cold air intake into fenderwall.
bbk adj. fuel pressure regulator
24 lb injectors.
power plus intake manifold ,port matched to heads.
ford racing e303 cam
chromeoly retainers, HD valve locks,high pressure valve locks,
moly piston rings, HD rod bearings,HD main bearings
HD roller timing set
Chrome oly push rods
hypertech pistons
ported exhuast side and bowls,3 ang valve job ,guides cut.
custom grinded crankshaft 10&10
has all ARP bolts
has manely intake and exuast valves, 1.941.60
gt40 springs
MSD 6AL ignition.
accel coil.
has mac shorty headers, mac off rd h pipe
custome side exhaust
has new 4:10 gears in the 8.8
also i just put in a new 5spd tranny bought from a good guy on the corral named Shifter, has all new internals, hardened input shaft. hurst shifter
the vert top needs to be replaced.
Email me at driftsx@gmail.com for pics. I have enough. looking for 5000obo. :j:
car is lowered with sport line springs, kyb shocks.
for the motor it has 30k miles. its a built 306 by rj kauffman engine services. have reciepts and all.
366hp, 403 tq
specs on motor:
all new accesaries
new plugs,
motorsports spark plug wires
diablo sport tuned computer
bbk 65mm port matched throttle body
bbk cold air intake into fenderwall.
bbk adj. fuel pressure regulator
24 lb injectors.
power plus intake manifold ,port matched to heads.
ford racing e303 cam
chromeoly retainers, HD valve locks,high pressure valve locks,
moly piston rings, HD rod bearings,HD main bearings
HD roller timing set
Chrome oly push rods
hypertech pistons
ported exhuast side and bowls,3 ang valve job ,guides cut.
custom grinded crankshaft 10&10
has all ARP bolts
has manely intake and exuast valves, 1.941.60
gt40 springs
MSD 6AL ignition.
accel coil.
has mac shorty headers, mac off rd h pipe
custome side exhaust
has new 4:10 gears in the 8.8
also i just put in a new 5spd tranny bought from a good guy on the corral named Shifter, has all new internals, hardened input shaft. hurst shifter
the vert top needs to be replaced.
Email me at driftsx@gmail.com for pics. I have enough. looking for 5000obo. :j: