PDA

View Full Version : Allignment



05Classic
05-01-2006, 05:29 PM
Ok, I finally got my sportline springs in from Eibach to lower the stang 2 inches. My questions is do I need to by caster/camber adjusters to be able to get a proper allignment, or can I just go to a shop and get it alligned after I install them?

02BlueStang
05-01-2006, 07:12 PM
anything lower than 1.5" and get ready to look pigeon toed...you dont "have" to get it aligned, but I would recommend it or you will go through tires like no tomorrow....the stock plates can only handle a drop of about 1.5" at the max end....all cars are different though, but with the sportlines I know you wont be able to get the stock plates to align it properly...go pick up an aftermarket caster/camber kit...Steeda, MM etc...I have MM on my car and was extremly easy to do...ps, if you are for sure lowering it with Sportlines, it will save you time to just do the switch on the camber plates while everything is apart ;)