birdman941
03-05-2006, 11:44 PM
Hi everyone.
Last year, I bought a body in white from Steeda down here in Florida.
It's a 2004 Mustang body, BRANK SPANKING NEW!!
I am building this car from the ground up!
So far, I have a new take-out IRS unit from a 2004 Cobra in it.
I will be building it as if Ford had decided to build a Cobra "R" in 2004, which they didn't.
Anyway, this is what I have decided to do, but many options are still open. BTW: I have also posted this info on www.mach1registry.org
Edits in bold type are final decisions some with parts acquired
Appearance:
Rear Bumper: 03/04 Cobra with rear exhaust ( so I can run SFC's)
Front Bumper: 03/04 Cobra w/ Foglights
Possible/probable "R" type front lower valance extension/spoiler
03/04 Cobra side skirts and 1/4 scoops
Mach/Bullitt type 1/4 windows and sail panels ( just purchased!)
2000 Cobra "R" Hood
2000 Cobra "R" type rear wing
Cobra/export type tail lights
Torch Red ( 2004 color)
Suspension:
Bilsteins Front and Rear ( 03/04 Cobra spec)
FRPP Front and Rear Cobra spring kit
Cobra steering gear and coupler shaft ( it's different than the others)
2000 Silver FRPP wheels
BFG Tires KDW or whatever they are, 2000 "R" size
Front brakes: Brembo "R" kit
Rears: Stock Cobra/Mach
Braided brake hoses all around
ABS w/Traction control
Interior:
Hybrid 2004 Cobra/ Mach interior and dash ( Black/ dark gray)
Mach 460 Sound
AIR CONDITIONING. ( this is Florida, after all)
Engine combination:
5.4 32V Navi motor
T56 6 speed w/ Tri-Ax shifter
3.55 rear gears
Forged Manley H Beam Rods and Forged Pistons 11:1
Ported FR500 heads and cams (Poss. ported by Boss330 racing)
FRPP Aluminum Flywheel and Cobra Clutch kit
March Fluid Damper type UD Pullies
Hybrid intake ( Finalizing ideas. Hope it works)
BBK Dual 65mm Throttle body ( Just kidding. I am going Accufab)
Ford EEC 5 PCM from mach ( tuned or chipped)
100% 04 Mach 1 wiring harnesses throughout
Cobra fuel tank with Dual pumps
Headers: ( working on that too. Ideas.............)
Hi flow cats. Yes I am running cats. Probably 03 Mach 4 brick.
Still have not made final decision on the seats, but it will have front and rear seating.
I am hoping for 450 at the wheels. Maybe more. N/A
What do you guys think?
Ideas, opinons? ( be nice)
Last year, I bought a body in white from Steeda down here in Florida.
It's a 2004 Mustang body, BRANK SPANKING NEW!!
I am building this car from the ground up!
So far, I have a new take-out IRS unit from a 2004 Cobra in it.
I will be building it as if Ford had decided to build a Cobra "R" in 2004, which they didn't.
Anyway, this is what I have decided to do, but many options are still open. BTW: I have also posted this info on www.mach1registry.org
Edits in bold type are final decisions some with parts acquired
Appearance:
Rear Bumper: 03/04 Cobra with rear exhaust ( so I can run SFC's)
Front Bumper: 03/04 Cobra w/ Foglights
Possible/probable "R" type front lower valance extension/spoiler
03/04 Cobra side skirts and 1/4 scoops
Mach/Bullitt type 1/4 windows and sail panels ( just purchased!)
2000 Cobra "R" Hood
2000 Cobra "R" type rear wing
Cobra/export type tail lights
Torch Red ( 2004 color)
Suspension:
Bilsteins Front and Rear ( 03/04 Cobra spec)
FRPP Front and Rear Cobra spring kit
Cobra steering gear and coupler shaft ( it's different than the others)
2000 Silver FRPP wheels
BFG Tires KDW or whatever they are, 2000 "R" size
Front brakes: Brembo "R" kit
Rears: Stock Cobra/Mach
Braided brake hoses all around
ABS w/Traction control
Interior:
Hybrid 2004 Cobra/ Mach interior and dash ( Black/ dark gray)
Mach 460 Sound
AIR CONDITIONING. ( this is Florida, after all)
Engine combination:
5.4 32V Navi motor
T56 6 speed w/ Tri-Ax shifter
3.55 rear gears
Forged Manley H Beam Rods and Forged Pistons 11:1
Ported FR500 heads and cams (Poss. ported by Boss330 racing)
FRPP Aluminum Flywheel and Cobra Clutch kit
March Fluid Damper type UD Pullies
Hybrid intake ( Finalizing ideas. Hope it works)
BBK Dual 65mm Throttle body ( Just kidding. I am going Accufab)
Ford EEC 5 PCM from mach ( tuned or chipped)
100% 04 Mach 1 wiring harnesses throughout
Cobra fuel tank with Dual pumps
Headers: ( working on that too. Ideas.............)
Hi flow cats. Yes I am running cats. Probably 03 Mach 4 brick.
Still have not made final decision on the seats, but it will have front and rear seating.
I am hoping for 450 at the wheels. Maybe more. N/A
What do you guys think?
Ideas, opinons? ( be nice)