skip nay
10-04-2005, 07:37 PM
Ihave some parts that I need to get rid of before the fall nats so I can get my project together. No reasonable offer will be refused and if it doesn't sell soon it will be going on EBAY. Thanks guys here is pics of what I have...
Edelbrock heads 1.90/1.60 valves. With rockers I want $1000 or $900 without. The heads are ported just alittle. They are gasket matched on each side(intake or exhaust). I will also give you head bolts and exhaust bolts for the heads.
http://i20.photobucket.com/albums/b213/skips398/Carpartsforsale010.jpg
Here is a performer RPM air gap intake for a 302 with a holley 650 dp. The carb does have reusable seals so you can use different jets and still use the same seals. I think I also have another set of these. I will take $400 for intake and carb.
http://i20.photobucket.com/albums/b213/skips398/Carpartsforsale026.jpg
BBK X pipe off a 96 cobra $100
http://i20.photobucket.com/albums/b213/skips398/Carpartsforsale029.jpg
Here is aset of 4 Optma wheels. The size is 16x8 for all. 2 have bald tires and the other 2 have 215/60/16 with BFGoodrich comp T/A 8/32 tread. I will take $500 for these rims. I did have the reciet from the guy who paid $1,600 for them.
http://i20.photobucket.com/albums/b213/skips398/Carpartsforsale016.jpg
Here is a est of welds 2 are 15/3.5 and the other two are 15/8. the back tires are bald and the front are 165r15 like new tires. They need buffed $500 or I will buff them for you for $600
http://i20.photobucket.com/albums/b213/skips398/Carpartsforsale007.jpg
Her is a set of mufflers and tail pipes. They were on a 96 cobra and should be able to use them on a fox body car. 3'' New is $400 I will take $200
http://i20.photobucket.com/albums/b213/skips398/Carpartsforsale030.jpg
I have a Fcam, lifters, push rods, and timing chain for sale with less than 3,000 miles on it. I will take $300 for all.
I have set of turbines with 26x10.5x15 et streets and BFGoodrich 205/60/15 comp T/a with about 4/32 tread. Make a reasonable offer. I was thinking around $250.
Also have like new tires just 2 though. They are Michelin XW4 225/60/16. The tread is 9/32 and will take $50 for them.
Also have a set of D80E heads 70cc with rockers
Also have a set of DOOE heads. It also says 69 302 on them 70cc heads
Stock rods and pistons out of a 1974 windsor. also have crank.
I also have pistons for a long rod 302. (5.4 rod stock crank) I have over $750 in pistons, rings, wrist pins, bearings. They will handle 800 plus horsepower. I will let them go for $450
Everything is negotiable.
Edelbrock heads 1.90/1.60 valves. With rockers I want $1000 or $900 without. The heads are ported just alittle. They are gasket matched on each side(intake or exhaust). I will also give you head bolts and exhaust bolts for the heads.
http://i20.photobucket.com/albums/b213/skips398/Carpartsforsale010.jpg
Here is a performer RPM air gap intake for a 302 with a holley 650 dp. The carb does have reusable seals so you can use different jets and still use the same seals. I think I also have another set of these. I will take $400 for intake and carb.
http://i20.photobucket.com/albums/b213/skips398/Carpartsforsale026.jpg
BBK X pipe off a 96 cobra $100
http://i20.photobucket.com/albums/b213/skips398/Carpartsforsale029.jpg
Here is aset of 4 Optma wheels. The size is 16x8 for all. 2 have bald tires and the other 2 have 215/60/16 with BFGoodrich comp T/A 8/32 tread. I will take $500 for these rims. I did have the reciet from the guy who paid $1,600 for them.
http://i20.photobucket.com/albums/b213/skips398/Carpartsforsale016.jpg
Here is a est of welds 2 are 15/3.5 and the other two are 15/8. the back tires are bald and the front are 165r15 like new tires. They need buffed $500 or I will buff them for you for $600
http://i20.photobucket.com/albums/b213/skips398/Carpartsforsale007.jpg
Her is a set of mufflers and tail pipes. They were on a 96 cobra and should be able to use them on a fox body car. 3'' New is $400 I will take $200
http://i20.photobucket.com/albums/b213/skips398/Carpartsforsale030.jpg
I have a Fcam, lifters, push rods, and timing chain for sale with less than 3,000 miles on it. I will take $300 for all.
I have set of turbines with 26x10.5x15 et streets and BFGoodrich 205/60/15 comp T/a with about 4/32 tread. Make a reasonable offer. I was thinking around $250.
Also have like new tires just 2 though. They are Michelin XW4 225/60/16. The tread is 9/32 and will take $50 for them.
Also have a set of D80E heads 70cc with rockers
Also have a set of DOOE heads. It also says 69 302 on them 70cc heads
Stock rods and pistons out of a 1974 windsor. also have crank.
I also have pistons for a long rod 302. (5.4 rod stock crank) I have over $750 in pistons, rings, wrist pins, bearings. They will handle 800 plus horsepower. I will let them go for $450
Everything is negotiable.