Anyone interested in a GREAT system for your mustang?

[_eazy_]

I have 2 KICKER CVR 12's in a custom sealed enclosure that will FIT IN A VERT. It's very hard to find an enclosure that will hold 2 12's in the back of a vert...

Along with the BRAND NEW subs and the enclosure, I'm including the amp for the subs. A KICKER 300.2 Amp is all you need for some serious punch.

I'm gonna try to sell it on GS before I put it on eBay for someone to buy it. I'd rather let someone who has a stang (maybe even a vert) have a shot at this.

The whole setup cost me 1200 but im letting it go for 300.

remember, 2 CVR 12's (400 watts RMS, 800 watts peak per sub 88dB sensitivity)
300.2 Amp (300 watts per channel for 2 channels)
Custom Sealed Enclosure (will fit in any mustang)

http://electrowelt.system-shop.at/si/s133iprodd351.jpg




Here's the enclosure under my desk:


http://www.gotstang.com/gs_resizer/Studio%20S6.JPG


http://www.autosound.hr/gfx/ponuda/poj_kicker/poj_kicker_300.jpg

[_eazy_]

let me emphasize that these subs are BRAND NEW and NOT used

[audiobahn81]

hey eazy was wondering if you would sell just the amp? If so how much

[_eazy_]

hey eazy was wondering if you would sell just the amp? If so how muchif i break this combo up then it really takes away from everything else. the amps you can get online for 184.00

search on google for a Kicker 300.2 two-channel amp

sorry bro... but i just can't seperate em.

if you're interested, i can sell you a JL Audio 250/1 Mono Class D Sub Amp (single channel of 250 watts rms @ 4 ohm) for $150.00 and for another $100.00 i'll throw in a baerly used matching JL w3 12" sub. It's 300 watts rms and 600 peak (perfect for the amp)



http://www.jlaudio.com/subwoofers/images/12W3v2.gif
http://www.jlaudio.com/subwoofers/images/12W3v2.jpg (http://www.jlaudio.com/subwoofers/12w3v2.html#)

The 12W3v2 offers a great balance between reasonable enclosure volume and massive output capabilities. Very long excursion capability and highly linear motor and suspension designs combine to deliver maximum performance from moderate to high power levels. This speaker works extremely well in sealed, ported and bandpass enclosures and its dual voice coil design gives the user a high degree of application flexibility.

Nominal Diameter: 12 inches (300 mm)
Continuous Power Handling: 300 Watts
Voice Coil: 2.25" diameter, 4-layer, Kapton former
Available Configurations: Dual 2 ohm, Dual 4 ohm or Dual 6 ohm
Xmax (one-way, linear): 0.46"-0.51" (11.7-13.0 mm) depending on specific model
Sealed Enclosure Range: 1.00-1.50 cu.ft. (28.3-42.0 liters)
Ported Enclosure Range: 2.00-3.00 cu.ft. (57.0-85.0 liters)
VRC™ Technology: YES
Elevated Frame Technology: YES




here's the amp specs:

Rated Power:
250 W RMS @ 1.5 ohm-4 ohm (11V-14.5V)
http://www.jlaudio.com/amps/images/250_1_L.JPG

[synister281]

if you werent in FL, and it wasnt for a Vert... i'd be all over it :(

i need some bass in the stang...

[_eazy_]

if you werent in FL, and it wasnt for a Vert... i'd be all over it :(

i need some bass in the stang...it dosnt HAVE to go in a vert. by putting it in a coupe you still have loads of trunk space... it will just fit in a vert.

im shipping it to you at no charge.


anything else?

[04redmach1]

The box is made real good and will be Xcellent in vert or coup.. You will have alotta space left in trunk.. Ive seen box and its a real good buy also.. subs new i sell at $130 a piece and a custom box is $150 and up.. Better jump on it guyz.

[_eazy_]

The box is made real good and will be Xcellent in vert or coup.. You will have alotta space left in trunk.. Ive seen box and its a real good buy also.. subs new i sell at $130 a piece and a custom box is $150 and up.. Better jump on it guyz.
:thanks:

[04redmach1]

:fart:

[_eazy_]

up for the morning

[_eazy_]

^

[_eazy_]

^

[_eazy_]

this setup is going on ebay in a couple days.


if anyone wants this then act now

[CODY2003]

you can feel free to sponsor the subs to me. I will put your logo on my new enclosure. :thumpupn: Can't use the amp though, it's to big to fit in the spot I made for my amps.

[_eazy_]

you can feel free to sponsor the subs to me. I will put your logo on my new enclosure. :thumpupn: Can't use the amp though, it's to big to fit in the spot I made for my amps.
nice try

[CODY2003]

nice try
had to try. I'll just pimp my Xplods then. :thumpupn:

[_eazy_]

had to try. I'll just pimp my Xplods then. :thumpupn:can you spread the word about this thread on 3.8?

[stalker]

I may be very interested. I have to check on finances though first.

[_eazy_]

sounds good bro, let me know

[EddieGT]

goddamn that's a kickass deal... I'm gonna ask around, see if anyone I know is interested.

[_eazy_]

goddamn that's a kickass deal... I'm gonna ask around, see if anyone I know is interested.
thanks a ton bro