Need some opinions guys(and gals)

[CODY2003]

I'm thinking about making something similar to this if I can get a hold of some alluminium. I like the coin from the 40th but don't have one and I don't want to pay for this one on ebay when I can have a custom one for the cost of materials.
http://i21.ebayimg.com/01/i/02/03/a3/97_1_b.JPG
http://i10.ebayimg.com/02/i/02/03/17/d2_1.JPG
anyway, what are some other things that you guys can think of that would look good there, I'm wanting to continue the clean look with the car so I really don't want anything too flashy.

or, if any of you guys went to the 40th show and would like to get rid of your coin let me know.

[01GTType]

The coin plate would go over one of your cup holders am I right? That would kind of suck if it was permanent. Its a nice coin though.

[jbarr668]

Yeah, its a cup delete. They look good especially with the matching shifter bezel.

[J]

The coin plate would go over one of your cup holders am I right? That would kind of suck if it was permanent. Its a nice coin though.
http://www.forumsigs.com/users/coroner1413/attention.jpg

Make that shit into a transparent gif and ill put it on the site...

LOL!

[CODY2003]

It just sets in like a plug, or at least the one I will make will. I never use that cup holder anyway.
Now back to my question! :goodbye:

[01GTType]

http://www.forumsigs.com/users/coroner1413/attention.jpg

Make that shit into a transparent gif and ill put it on the site...

LOL!

Ok will do..

[232stang]

i dont like the coin thing at all

[Domin8stang]

i dont like the coin thing at all
me either, looks out of place, if it were flat black or something i'd like it better

[CODY2003]

me either, looks out of place, if it were flat black or something i'd like it better
What about a black center with the polished ring to match my shifter bezel and eventually my fuel door? And I still havn't seen any ideas for a replacement accent piece.

[01GTType]

Heres a three different ideas off of Ebay.. :)

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7934503483&category=42612

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7934458818&category=33695

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7933659050&category=42612

[CODY2003]

Heres a three different ideas off of Ebay.. :)

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7934503483&category=42612
That's what I will be making, but I need something for the center to make it less plain

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7934458818&category=33695
Don't smoke, and I don't want anyone to get the idea that they can in the car. Plus, too plain.

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7933659050&category=42612
I would rather just cover it, plus it would be hard to make that on a laith without warping it. at least with the stuff that I would be using.

Thx for the ideas though. :thanks:

[01GTType]

I would rather just cover it, plus it would be hard to make that on a laith without warping it. at least with the stuff that I would be using.

Thx for the ideas though. :thanks:

Yeah I agree would be a pain in the butt on a lathe. Well good luck with whatever way you go with. :thumbup:

[CODY2003]

BUMP! :ranting:

[Domin8stang]

nice sig cody, ur god at ps, just use that one as a template and make some variations, and have us the people vote

[CODY2003]

nice sig cody, ur god at ps, just use that one as a template and make some variations, and have us the people vote
Say Wuh? You mean make my sig for other people?

[Floored]

Cody, do you have the eBay link for the auction that goes with that delete you got the pic from? Would like to see what they have to say about it and what the $$ is. ;)

Its a cool idea, how about making some with the GT or Snake emblem and such?

[CODY2003]

Cody, do you have the eBay link for the auction that goes with that delete you got the pic from? Would like to see what they have to say about it and what the $$ is. ;)

Its a cool idea, how about making some with the GT or Snake emblem and such?
I'll look for a link, but I know that it is $35. That's a little high for something I can make for myself completely custom for not much more than that.

as for selling them, I won't be. Too much work. lol.

[CODY2003]

here is the link.
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7934503480&category=33695&sspagename=WDVW

[Inferno]

oh wow...me likes

...hmmmm maybe a pony instead of the car?

[Domin8stang]

no cody i meant use the pic of the coin as a template and p.s. some custom things in there, such as your cross and such, eval could make u a badge style emblem for it... im ub3r creative!

[03GT]

I have this in my mustang

http://www.mgwltd.com/mustang_cupholder.html

I have that whole setup, but my shifter says GT on it instead of the pony

[CODY2003]

Like these?
http://img.photobucket.com/albums/v368/Cody2003/cup-holder-delete.jpg
http://img.photobucket.com/albums/v368/Cody2003/cup-holder-delete2.jpg

[Inferno]

Like these?
http://img.photobucket.com/albums/v368/Cody2003/cup-holder-delete.jpg
http://img.photobucket.com/albums/v368/Cody2003/cup-holder-delete2.jpg

#1 has my vote!

[CODY2003]

#1 has my vote!
Good, now do you know of a pony roughly that size?

[spiffy]

Like these?
http://img.photobucket.com/albums/v368/Cody2003/cup-holder-delete.jpg
http://img.photobucket.com/albums/v368/Cody2003/cup-holder-delete2.jpg
if i was going for a coin id go for #1 looks way better then that factory 0ne i think i personaly would probubly just leave it as a cup holder

[spiffy]

I'm thinking about making something similar to this if I can get a hold of some alluminium. I like the coin from the 40th but don't have one and I don't want to pay for this one on ebay when I can have a custom one for the cost of materials.
http://i21.ebayimg.com/01/i/02/03/a3/97_1_b.JPG
http://i10.ebayimg.com/02/i/02/03/17/d2_1.JPG
anyway, what are some other things that you guys can think of that would look good there, I'm wanting to continue the clean look with the car so I really don't want anything too flashy.

or, if any of you guys went to the 40th show and would like to get rid of your coin let me know.i think the 94 models have a cleaner ceter concole with the ash tray door good place to hide switchs for the juice to if u ever get any

[CODY2003]

Thx for the opinions guys.
I really like this center concole better than the 94-01, because in the old one, the trapdoor looks awesome, but if you have that, you don't get cup holders. I like the cup holder in the back, but With my longer shifter, the fron one is useless except for change, so I though I would do something more original that still looked good.

[Laguna Seca R]

Which way did you choose Cody? I've been wanting to do something like that for awhile but waiting for an R or SVT offering from somebody.

[Stang Gurl]

This is a pretty creative idea Cody. Good luck witht he project. I like them both.

[Hockeyb0y3]

Thx for the opinions guys.
I really like this center concole better than the 94-01, because in the old one, the trapdoor looks awesome, but if you have that, you don't get cup holders. I like the cup holder in the back, but With my longer shifter, the fron one is useless except for change, so I though I would do something more original that still looked good.

i love the flip pannel i have on my 96 i just can't figure out what i wana do with all 3 buttons i can put in there, i got red underbody neon for one, but even after my supercharger i don't plan on juice . . any ideas?

[CODY2003]

i love the flip pannel i have on my 96 i just can't figure out what i wana do with all 3 buttons i can put in there, i got red underbody neon for one, but even after my supercharger i don't plan on juice . . any ideas?
I'm this sites resident ricer, so I would say interior neons, and your amp kill switch if you have a sysytem.

[Laguna Seca R]

So what did u decide to do with the cupholder? Custom?


I'm this sites resident ricer, so I would say interior neons, and your amp kill switch if you have a sysytem.

[CODY2003]

So what did u decide to do with the cupholder? Custom?
I'll be making my own and I have an idea that I'm going to test over Thanksgiving, If it comes out well, I'll post the results for more opinions. and I'll see what kinda price I can get you for one similar that says SVT or something like that for you.

[Laguna Seca R]

Much appreciated... u da man cody


I'll be making my own and I have an idea that I'm going to test over Thanksgiving, If it comes out well, I'll post the results for more opinions. and I'll see what kinda price I can get you for one similar that says SVT or something like that for you.

[CODY2003]

BUMP!!

[Laguna Seca R]

I'm too slow to figure that one out... :confused:


BUMP!!

[Hockeyb0y3]

I'm this sites resident ricer, so I would say interior neons, and your amp kill switch if you have a sysytem.

i have both, i am the resident ricer in my car club, and those arnt bad ideas thanks man.

[CODY2003]

I'm too slow to figure that one out... :confused:
I'm keeping my thread at the top of the section. like bumping it to the top. :silly:

[Laguna Seca R]

Ahhhh... and reason for that would be? Sorry I'm kindof a newb to the whole forum experience.

[CODY2003]

Ahhhh... and reason for that would be? Sorry I'm kindof a newb to the whole forum experience.
I'm hanging desperately to the hope that someone will give me the idea of a life time for it. lol.

[95mustang302]

they look awsome 2 bad mine is i convert.

[CODY2003]

they look awsome 2 bad mine is i convert.
Huh? Why does that matter? I have a vert as well and it works just fine.

My father got me that one with the coin for christmas. :dance:
I polished and painted it today and it looks awesome. Here are some pics. I'll get better ones tomorrow after I get off from work.

http://img.photobucket.com/albums/v368/Cody2003/coin1.jpg
http://img.photobucket.com/albums/v368/Cody2003/coin2.jpg
http://img.photobucket.com/albums/v368/Cody2003/coin3.jpg