PDA

View Full Version : FS: Vortech MaxFlow Power Cooler 96-02, 2v, Polished!! CHEAP!! **PIX**



GirlzGT
12-09-2007, 10:16 PM
Got this power cooler for sale....i installed it and it works great....but i found out that after my winter projects, my power levels are going to push the limits of this cooler, so i need to go with an FMIC setup....

These things are $2200 from fortech, and can be found elsewhere for around $1600 or so...this is a COMPLETE kit. The manual says fits 96-02...but no reason it should not fit an 03/04 as well.

This kit has approx 5k miles on it!!!
This is the POLISHED unit. The discharge tube was powdercoated, and i stripped and polished it as well. When in the car, it will look GREAT! However, it does have the typical knicks and dings and a few light scratches here and there. It is a used part, so keep that in mind.

I noticed a slight rattling sound coming from inside the cooler...on the water side of things...NOT the air side. I talked to Vortech....They said to run water through it with a hose for a while (which i did) and if it flows fine, and nothing spits out, it shouldn't be an issue. So I did, letting water run through it for about 1 hour. no obstructions, and no debris. Perfect.

I can tell you that i know for a fact, it was working 100% fine on the previous owners car right before removal, and he had great gains from this.... or i would have never dished out the cash for it....+ i installed it on my car and no issues to report.

again, I can tell you i did various simple tests, like pushing air through it (seems to flow perfect) and pumped water through it, which also flowed perfectly. (see pics).

*****************************************

You get:

Polished Power Cooler
Polished Discharge tube
1, 3" coupler
Water Tank
Heat Exchanger
Water Pump
All the hoses and clamps.
Vortech Instruction Booklet. (not pictured)

You will need:

some wire for the pump
some misc screw/bolts for mounting the exchanger

******************************************


$725 shipped for everything or Best Offer!!!

Here are some pics...


http://i9.photobucket.com/albums/a72/frogiiie/VortechCoolerSale002.jpg
http://i9.photobucket.com/albums/a72/frogiiie/VortechCoolerSale005.jpg
http://i9.photobucket.com/albums/a72/frogiiie/VortechCoolerSale006.jpg
http://i9.photobucket.com/albums/a72/frogiiie/VortechCoolerSale003.jpg
http://i9.photobucket.com/albums/a72/frogiiie/VortechCoolerSale004.jpg
http://i9.photobucket.com/albums/a72/frogiiie/VortechCoolerSale001.jpg

GirlzGT
12-12-2007, 08:42 PM
TTT $695 shipped and i will even overnight it if paid tonight...free of charge...you would have it friday, no matter which state your in!

i also forgot to mention, the discharge tube (elbow) was trimmed a little when i mocked it up to my P51 intake...it should still be fine on a regualar setup....the blue coupler is gone, replaced with a black 3 layer..GOOD coupler....so thats included, also the elbow has a hole drilled & tapped in it for a lighting (scre in type) IAT sensor.....which i can include if need be...though they can be found cheap online...think i got mine for $20.....just replaces the push in type...great for boosted cars.